Running Free Dancer
The Dancer celebrates joy, happiness and freedom. She is living life to the fullest, breaking out from the norm and doing something wonderful.
If you have ever felt the need to just let go and run free, then this sculpture could remind you of that time as well as remind you that you still can!
This is a one-of-a-kind bronze sculpture.
Material: | Bronze |
Length | 28 inches (71 cm) |
Width: | 12 inches (30.5 cm) |
Height | 17.5 inches (44.5 cm) |
Color may vary from the images, as the application of a patina is a manual and artistic process.
Below is a brief overview of the process I used to make them:
This is a hand-made item, sculpted in clay by Terrence and individually cast in bronze by a small foundry in California. Each casting undergoes hours of labor to mold, cast, clean, and patina. Terrence oversees the process and inspects and modifies each piece as needed to achieve the final result, a truly one-of-a-kind bronze sculpture.
I started by making the initial sculpture using Chavant oil-based clay. The great feature of this type of clay is that it always stays malleable, it never dries out, so it can be worked over a long period of time.
A mold is built upon the clay. This is the mother mold that is used to create multiple wax copies. The wax copies are used in the lost wax casting method, the age-old method of casting bronze.
The bronze casting must then go through several labor-intensive steps. It must be assembled, cleaned up, and all imperfections due to the casting process are removed.
The final step is applying the patina. A patina is not paint. It is the actual surface of the metal whose color has been chemically altered. A common example of a patina is the normal rust that forms on the surface of iron, the chemical agent in this case being water. When applying a patina to bronze, various chemicals are used to achieve specific colors that are much more pleasing, as well as to create designs. The bronze is first heated with a blow torch in order to accelerate the reaction. Chemicals are sprayed or brushed on to the heated metal in layers, creating patterns and depths of color that are very beautiful and natural looking.